2011

  • BIRKHOLZ, H., 2011. A unifying approach to isotropic and anisotropic total variation denoising models. Journal of Applied Computer Science and Mathematics, 235 (8), pp. 2502 - 2514.
  • BERGEMANN, C., QUADE, A., KUNZ, F., OFE, S., KLINKENBERG, E.-D., LAUE, M., SCHROEDER, K., WEISSMANN, V., HANSMANN, H., WELTMANN, K.-D. and NEBE, J.B., 2011. Ammonia plasma functionalized polycarbonate surfaces improve cell migration inside an artificial 3D cell culture module. Plasma Processes and Polymers, pp. 261-272. DOI:10.1002/ppap.201100059.
  • BUEHLER, S.M., STUBBE, M., GIMSA, U., BAUMANN, B. and GIMSA, J., 2011. A decrease of intracellular ATP is compensated by increased respiration and acidification at sub-lethal parathion concentrations in murine embryonic neuronal cells: Measurements in metabolic cell-culture chips. Toxicology Letters, 207, pp. 182-190.
  • ELTER, P., WEIHE T., LANGE, R., GIMSA, J. and BECK U., 2011. The influence of topographic microstructures on the initial adhesion of L929 fibroblasts studied by single-cell force spectroscopy. European Journal of Biophysics, 40, pp. 317-324.
  • ENGEL, K. and KIESEL, A., 2011. Approximated matrix decomposition for IMRT planning with multileaf collimators, OR Spectrum, 33 (1),  pp. 149-172.
  • FINKE, B., HEMPEL, F., TESTRICH, H., ARTEMENKO, A., REBL, H., KYLIAN, O., MEICHSNER, J., BIEDERMANN, H., NEBE, J. B., WELTMANN, K-D. and SCHRÖDER, K., 2011. Plasma processes for cell-adhesive titanium surfaces based on nitrogen-containing coatings. Surface and Coating Technology, 205 (2), pp. 520-524.
  • FRIEDMANN, A., CISMAK, A., TAUTORAT, C., KÖSTER, P. J., BAUMANN, W., HELD, J., GASPAR, J.,  RUTHER, P., PAUL, O. and HEILMANN, A., 2011. FIB preparation and SEM investigations for three-dimensional analysis of cell cultures on microneedle arrays. SCANNING: The Journal of Scanning Microscopies, 33, pp. 1-9.
  • GONGADZE, E., KRALJ-IGLIČ, V., VAN RIENEN, U. and IGLIČ, A., 2011. Derivation of Langevin Poisson-Boltzmann equation for point-like ions using functional density theory. Elektrotehniski Vestnik/Electrotechnical  Review, 78 (1), pp. 1-4.
  • GONGADZE, E., VAN RIENEN, U., KRALJ-IGLIČ, V. and IGLIČ, A., 2011. Langevin Poisson-Boltzmann equation: point-like ions and water dipoles near a charged membrane surface. General Physiology and Biophysics, 30 (2), pp.130-137. DOI: 10.4149/gpb_2011_02_130.
  • GONGADZE, E., KABASO, D., BAUER, S., SLIVNIK, T., SCHMUKI, P., VAN RIENEN, U. and IGLIČ, A., 2011. Adhesion of osteoblasts to a nanorough implant titanium surface. International Journal of Nanomedicine, 6, pp. 1801–1816. DOI:10.2147/IJN.S21755.
  • GONGADZE, E., VAN RIENEN, U. and IGLIČ, A., 2011. Generalized Stern models of the electric double layer considering the spatial variation of permittivity and finite size of ions in saturation regime, Cellular and Molecular Biology Letters, pp. 576-594. DOI: 10.2478/s11658-011-0024-x.
  • HERRMANN, S., KÄHLER, M., SOUFFRANT, R., RACHHOLZ, R., ZIERATH, J., KLÜSS, D., MITTELMEIER, W., WOERNLE, C. and BADER, R., 2011. HiL simulation in biomechanics: A new approach for testing total joint replacements. Computer Methods and Programs in Biomedicine, 105, pp.109-119.
  • KABASO, D., GONGADZE, E., ELTER, P., VAN RIENEN, U., GIMSA, J., KRALJ-IGLIČ, V. and IGLIČ, A., 2011. Attachment of rod-like (BAR) proteins and membrane shape. Mini-Reviews in Medicinal Chemistry, 11 (4), pp. 272-282.
  • KABASO, D., GONGADZE, E., PERUTKOVÀ, Š., MATSCHEGEWSKI, C., KRALJ-IGLIČ, V., BECK U., VAN RIENEN, U. and IGLIČ, A., 2011. Mechanics and electrostatics of the interactions between osteoblasts and titanium surface. Computer Methods in Biomechanics and Biomedical Engineering, 14 (5), pp. 469-482.
  • KABASO, D., GONGADZE, E., JORGAČEVSKI, J., VAN RIENEN, U., ZOREC, R. and IGLIČ, A., 2011. Exploring the binding dynamics of BAR proteins. Cellular and Molecular Biology Letters, 16, pp. 398-411. DOI: 10.2478/s11658-011-0013-0.
  • LAUTRUP, B., APPALI, R., JACKSON, A. D. and HEIMBURG, T., 2011. The stability of solitons in biomembranes and nerves. European Physical Journal, 34 (6), pp. 57.
  • LIESE, F. and LIU, B., 2011. Randomized goodness of fit tests. Kybernetika, 47 (6), pp. 814-839.
  • NOWAK, K., MIX, E., GIMSA, J., STRAUSS, U., SRIPERUMBUDUR, K.K., BENECKE, R. and GIMSA, U., 2011. Optimizing a rodent model of Parkinson's disease for exploring the effects and mechanisms of deep brain stimulation. Parkinson's Disease.  Article ID 414682, 19 pages. DOI:10.4061/2011/414682.
  • REBL, A., REBL, H., LIU, S., GOLDAMMER, T. and SEYFRY, H.M., 2011. Salmonid Tollip and MyD88 factors can functionally replace their mammalian orthologues in TLR-mediated trout SAA promoter activation. Developmental and Comparative Immunology, 35, pp. 81–87.
  • SCHMITT, O. and BIRKHOLZ, H., 2011. Improvement in cytoarchitectonic mapping by combining electrodynamic modeling with local orientation in high-resolution images of the cerebral cortex. Microscopic Research and Technique, 74, pp. 225–243.
  • SOUFFRANT, R., ZIETZ, C., FRITSCHE, A., KLÜSS, D., MITTELMEIER, W. and BADER, R., 2011. Advanced material modelling in numerical simulation of primary acetabular press-fit cup stability. Computer Methods in Biomechanics and Biomedical Engineering, pp. 1-7. DOI:10.1080/10255842.2011.561012.
  • STRANAK, V., WULLF, H., REBL, H., ZIESTE, C., ARNDT, K., BOGANOWZIC, R., NEBE, J.B., BADER, R., PODBIELSKIE, A., HUBICKA, Z. and HIPPLER, R., 2011. Deposition of thin titanium-copper films with antimicrobial effect by advanced magnetron sputtering methods. Material Science and Engineering, C 31, pp. 1512–1519.
  • WYRWA, R., FINKE, B., REBL, H., MISCHNER, N., QUAAS, M., SCHÄFER, J., BERGEMANN, C., NEBE, J.B., SCHRÖDER, K., WELTMANN, K-D. and SCHNABELRAUCH, M., 2011. Design of plasma surface-activated, electrospun polylactide non-wovens with improved cell acceptance. Advanced Engineering Materials, 13 (5), pp. 165-171. DOI:10.1002/adem.201080116.
  • ZHANG, F., OTTERSTEIN, E., and BURKEL, E., 2011. Processing of porous Ti and Ti5Mn Foams by Spark Plasma sintering. Materials and Design, 32 (1), pp. 146-153.
  • ZHANG, F., ADAM, M., OTTERSTEIN, E. and BURKEL, E., 2011. Pulsed Electric field induced diamond synthesis from carbon nanotubes with solvent catalysts. Diamond and Related Materials, 20 (5-6), pp. 853–858.
  • ZHANG, F., MIHOC, C., AHMED, F., LATTE, C. and BURKEL, E., 2011. Thermal stability of carbon nanotubes, fullerene and graphite under spark plasma sintering. Chemical Physics Letters, 510, pp. 109–114.

2010

  • APPALI, R., PETERSEN, S. and VAN RIENEN, U., 2010. A comparison of Hodgkin-Huxley and soliton neural theories. Advances in Radio Science, 8, pp. 75-79. DOI: 10.5194/ars-8-75-2010.
  • BOHINC, K., GONGADZE, E., KRALJ-IGLIČ, V., VAN RIENEN, U. and IGLIČ, A., 2010. Metal surface in contact with electrolyte solution - Influence of spatial variation of dielectric constant. Elektrotehniski Vestnik/Electrotechnical Review, 77 (2-3), pp. 121-130.
  • ENGELBEEN, C., FIORINI, S. and KIESEL, A., 2010. A closest vector problem arising in radiation therapy planning. Journal of Combinatorial Optimization, 22 (4), pp. 609-629. DOI: 10.1007/s10878-010-9308-8.
  • ENGELBEEN, C. and KIESEL, A., 2010. Binary matrix decompositions without tongue-and-groove underdosage for radiation therapy planning. Algorithmic Operations Research, 5, pp. 119-132.
  • GALEK, T., PORATH, K., BURKEL, E., and VAN RIENEN, U., 2010. Extraction of effective permittivity and permeability of metallic powders in the microwave range. Modelling and Simulation in Materials Science and Engineering, 18, (2), Article ID: 025015. DOI: 10.1088/0965-0393/18/2/025015.
  • GAUER, T., ENGEL, K., KIESEL, A., ALBERS, D. and RADES, D., 2010. Comparison of electron IMRT to helical photon IMRT and conventional photon irradiation for treatment of breast and chest wall tumours, Radiotherapy and Oncology, 94, pp. 313-318.
  • HABA, Y., SCHIEBENHÖFER, A. K., KRÖGER, W., EWALD, H., SOUFFRANT, R., KLUESS, D., MITTELMEIER, W. and BADER, R., 2010. Determination of electrical and mechanical material parameters on the human femoral head, Biomedizinische Technik/ Biomedical Engineering, 55 (s1). pp. 182-185, DOI: 10.1515/bmt.2010.712.
  • IGLIČ, A., GONGADZE, E. and BOHINC, K., 2010. Excluded volume effect and orientational ordering near charged surface in solution of ions and Langevin dipoles. Bioelectrochemistry, 79 (2), pp. 223-227.
  • KLIEWE, C., SOUFFRANT, R., KLÜSS, D., WOERNLE, C., BRÖKEL, K. and BADER, R., 2010. Analytical computational model for the determination of the influence of design and surgical factors on the range of motion of total hip replacements. Biomedical Technology, 55 (1), pp. 47–55.
  • KLÜSS, D., MITTELMEIER, W. and BADER, R., 2010. Intraoperative impaction of total knee replacements: An explicit finite-element-analysis of principal stresses in ceramic vs. cobalt-chromium femoral components. Clinical Biomechanic, 25, pp. 1018–1024.
  • KÖSTER, P., BÜHLER, S.M., STUBBE, M., TAUTORAT, C., NIENDORF, M., BAUMANN, W. and GIMSA, J. 2010. Modular glass chip system measuring the electric activity and adhesion of neuronal cells - application and drug testing with sodium valproic acid. Lab on a Chip, 10, pp. 1579-1586. DOI: 10.1039/b923687b.
  • KÖSTER, P.J., TAUTORAT, C., BEIKIRCH, H., GIMSA, J. and BAUMANN, W., 2010. Recording electric potentials from single adherent cells with 3D microelectrode arrays after local electroporation. Biosensors and Bioelectronics, 26, (4), pp. 1731-1735.
  • LANGE, R., ELTER, P., BIALA, K., MATSCHEGEWSKI, C., STÄHLKE, S., LÖFFLER, R., FLEISCHER, M., NEBE, J.B., KERN, D. and BECK, U., 2010. Titanium surfaces structured with regular geometry-material investigations and cell morphology. Surface and Interface Analysis, 42 (6), pp. 497-501. DOI10.1002/sia.3320.
  • MATSCHEGEWSKI, C., STÄHLKE, S., LÖFFLER, R., LANGE, R., CHAI, F., KERN, D., BECK, U. and NEBE, J.B., 2010. Cell architecture-cell function dependencies on titanium arrays with regular geometry. Biomaterials, 31(22), pp. 5729-5740.
  • NEBE, J. B., JESSWEIN, H., WEIDEMANN, A., FINKE, B., LANGE, R., BECK, U., STÄHLKE, S. and SCHRÖDER, K., 2010. Osteoblast's sensitivity to topographical and chemical features of titanium. Material Science Forum, 638-642, pp. 652-657.
  • POTRATZ, C., KLÜSS, D., EWALD, H. and VAN RIENEN, U., 2010. Multi-Objective optimization of an electrostimulative acetabular revision system. IEEE Transactions on Bioengineering, 57(2), pp. 460-468.
  • REBENTISCH, R., LANGE, R. and BECK, U., 2010. Long-Term corrosion resistance of biomedical grade stainless steel iso 5832-1 ("316LVM") under external anodic electrical pulsing conditions. Advanced Material Research, 89-91, pp. 455-460. DOI:10.4028/wwwscientific.net/AMR. 89-91. 455.
  • REBL, H., FINKE, B., RYCHLY, J., SCHRÖDER, K. and NEBE, J.B., 2010. Positively charged material surfaces generated by plasma polymerized allylamine enhance vinculin mobility in vital human osteoblasts. Advanced Biomateriales, 12, pp. 356-364. DOI:10.1002/adbi.200900070.
  • REBL, H., FINKE, B., SCHRÖDER, K. and NEBE, B.J., 2010. Time-dependent metabolic activity and adhesion of human osteoblast-like cells on sensor chips with a plasma polymer nanolayer. International Journal of Artificial Organs, 33, pp. 738-748.
  • SCHMITT, O. and BIRKHOLZ, H., 2010. A hybrid approach to quantify lamination of the cerebral cortex. International Journal of Nonlinear Sciences and Numerical Simulation, 11(5), pp. 363–370.
  • STUBBE, M. and GIMSA, J., 2010. A short review on AC electro-thermal micropumps based on smeared structural polarizations in the presence of a temperature gradient. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 376, pp. 97-101. DOI:10.1016/j.colsurfa.2010.09.013.
  • SCHRÖDER, K., FINKE, B., LÜTHGEN, F., JESSWEIN, H., IHRKE, R., OHL, A., WELTMANN, K.-D., DIENER, A., RYCHLY, J. and NEBE, J.B., 2010. Similarities between plasma amino functionalized PEEK and titanium surfaces concerning enhancement of osteoblast cell adhesion. Journal of Adhesion Science and Technology, 24, pp. 905–923.
  • ZHANG, F., OTTERSTEIN E., BURKEL, E., 2010. Spark plasma sintering, microstructures and mechanical properties of macroporous titanium foams. Advanced Engineering Materials,  12 (9), pp. 863-872. DOI: 10.1002/adem.201000106.
  • ZHANG, F., WEIDMANN, A., NEBE, J. B., BECK, U., BURKEL, E., 2010. Preparation, Microstructures, mechanical properties and cytocompatibility of TiMn Alloys for Biomedical Applications. Journal of Biomedical Materials Research 94 (2), pp. 406-413.

Special Session at Biomedical Engineering 2010

  • VAN RIENEN, U., APPALI, R., BADER, R., BAUMANN, W., BECK, U., BEHREND, D., BENECKE, R., BIALA, K., BIRKHOLZ, H., BURKEL, E., ENGEL, G., GIMSA, J., GIMSA, U., GONGADZE, E., GRÜNBAUM, A., HABA, Y., LIESE, F., LIU, B., LÜDER, M., MATSCHEGEWSKI, C. and MITTELMEIER, W., MIX, E., NEBE, J.B., NOWAK, K.A., PAHNKE, J., PAU, H.W., PAULEWEIT, S., PETERSEN, S., POLNICK, S., REIMER, T., ROTT, G., SALOMON, R., VINTER, E., WEIHE, T., and WOLKENHAUER, O., 2010. Analysis and Simulation of Electrical Interactions of Implants with Biosystems, Biomedical Engineering, 55 (1), pp. 167–170. ISSN (Online) 1862 -278X, ISSN (Print) 0013-5585. DOI: 10.1515/BMT.2010.543.
  • APPALI, R., PETERSEN, S., GIMSA, J. and VAN RIENEN, U., 2010. Thermodynamic Theory of Nerve Signal Propagation and First Simulation of Soliton Model. Biomedical Engineering, 55 (1), pp. 186–189. ISSN (Online) 1862-278X, ISSN (Print) 0013-5585, DOI: 10.1515/BMT.2010.548.
  • BIALA, K., LANGE, R., STÄHLKE, S., NEBE, JB., und BECK, U., 2010. Physical and electrochemical characterisation of regular microstructred titanium and their influence on cell morphology. Biomedical Engineering, 55 (1), pp. 169. DOI:10.1515/bmt.2010.712.
  • WEIHE, T., BONK, S., and GIMSA, J., 2010. Single-Cell Force Spectroscopy for the determination of initial adhesion of cells to different surfaces, Biomedical Engineering, 55 (1), pp. 175-179. ISSN (Online) 1862-278X, ISSN (Print) 0013-5585. DOI: 10.1515/BMT.2010.545.
  • ROTT, G.A., ZHANG, F., HABA, Y. and BURKEL, E., 2010. Dielectric roerties of porous calcium titanate. Biomedical Engineering, 55 (1), pp.179-182. ISSN (Online) 1862-278X, ISSN (Print) 0013-5585. DOI: 10.1515/BMT.2010.546.
  • HABA, Y., SCHIEBENHOEFER, A.-K., KROEGER, W., EWALD, H., SOUFFRANT, R., KLUESS, D., MITTELMEIER, W. and BADER, R., 2010. Determination of electrical and mechanical material parameters on the human femoral head, Biomedical Engineering, 55 (1), pp.182-186. ISSN (Online) 1862-278X, ISSN (Print) 0013-5585. DOI: 10.1515/BMT.2010.547
  • GONGADZE, E., PETERSEN, S., IGLIC, A. and VAN RIENEN, U., 2010. Electrical Double Layer and Structured Titanium Implants,  Biomedical Engineering, 55 (1), pp. 171-174. ISSN (Online) 1862-278X, ISSN (Print) 0013-5585. DOI: 10.1515/BMT.2010.544.
  • REIMER, T., BAUMANN, W., KOESTER, P.J. and GIMSA, J., 2010. Gap Junction-vermittelte Signaltransmission in kortikalen neuronalen Netzwerken kultiviert auf Neurochips. Biomedical Engineering, 55 (1), pp. 33.

Poster

  • BIRKHOLZ, H., LABAHN, R., ENGEL, K. and NEBE, J. B., 2010. Automatische Auswertung von Aktinfilament-Strukturen in konfokal-mikroskopischen Bildern. Biomedical Engineering, 55 (1). ISSN (Online) 1862-278X, ISSN (Print) 0013-5585. DOI:10.1515/BMT.2010.553.
  • GRÜNBAUM, A., VAN Rienen, U. und PAU, HW., 2010. Ein 3D-CAD-Model of the Human Cochlea for Electromagnetic Studies. Biomedical Engineering, 55 (1), pp. 231-233. ISSN (Online) 1862-278X, ISSN (Print) 0013-558. DOI:10.1515/BMT.2010.653.
  • RHINOW, G., PETERSEN, S. and  VAN RIENEN, U., 2010. Small Influence of the brain anisotropy on the potential at the scalp, Biomedical Engineering, 55 (1), pp. 216-218. ISSN (Online) 1862-278X, ISSN (Print) 0013-5585. DOI:10.1515/BMT.2010.649.
  • VINTER, E., PETERSEN, S. and VAN RIENEN, U., 2010. Influence of the anisotropic conductivity of the brain tissue on the electricfield distribution around electrodes for deep brain stimulation. Biomedical Engineering, 55 (1), pp. 234-237, 2010, ISSN (Online) 1862-278X, ISSN (Print) 0013-5585, DOI: 10.1515/BMT.2010.654.

2009-2008

  • BONK, S.M., and LISDAT, F., 2009. Layer-by-layer assembly of electro-active gold nanoparticle/cytochromeC multilayers. Biosensors and Bioelectronics, 25, pp. 739–744. DOI: 10.1016/j.bios.2009.08.017.
  • DUWENSEE, H., MIX, M., STUBBE, M., GIMSA, J., ADLER, M. and FLECHSIG, G-U., 2009. Electrochemical product detection of an asymmetric convective polymerase chain reaction. Biosensensors and Bioelectronics, 25 (2), pp. 400-405. DOI:10.1016/j.bios.2009.07.025.
  • HOLTAPPELS, M., STUBBE, M. and GIMSA, J., 2009. AC-field-induced fluid pumping in microsystems with asymmetric temperature gradients. Physical Review E, 79 (2), pp. 026309. DOI:0.1103/PhysRevE.79.026309.
  • KIESEL, A., 2009. A function approximation approach to the segmentation step in IMRT planning, OR Spectrum, 34 (1), pp. 181-198. DOI:10.1007/s00291-009-0187-2.
  • KLUESS, D., SOUFFRANT, R., MITTELMEIER, W., WREE, A., SCHMITZ, K.-P. and BADER, R., 2009. A convenient approach for finite-element-analyses of orthopaedic implants in bone contact: modeling and experimental validation. Computer Methods and Programs in Biomedicine, 95 (1), pp. 23–30.
  • ZHANG, F., and BURKEL, E., 2009. Preparation of tricalcuim phosphate magnesium nanocomposites for load bearing bone regeneration applications. Biomaterialien, 10 (1), pp.130.
  • ZHANG, F., WEIDMANN, A., NEBE, J.B. and BURKEL, E., 2009. Effect of Manganese on the in vitro biomedical properties of titanium alloy. Biomaterialien, 10 (1), pp. 129.
  • ZHANG, F., WEIDMANN, A., NEBE, J. B. and BURKEL, E., 2009. Preparation of TiMn alloy by mechanical alloying and spark plasma sintering for biomedical applications. Journal of Physics: Conference Series, 144 (1), pp. 012007. DOI: 10.1088/1742-6596/144/1/012007

2008

  • KLUESS, D., ZIETZ, C., LINDNER, T., MITTELMEIER, W., SCHMITZ, K.-P. and BADER, R., 2008. Limited range of motion of hip resurfacing arthroplasty due to unfavorable ratio of prosthetic head size and femoral neck diameter. Acta Orthopaedica, 79 (6), pp. 748-754.